Disclosure: This site may receive compensation when you click on some links and make purchases.

Work In Progress: 1963 Jaguar XK-E Project

Even in project status, there is no mistaking the lines of a Jaguar XK-E. The great Enzo Ferrari, no slacker at building eye-catching automobiles, claimed the XK-E to be “the most beautiful car ever made“. Today’s 1963 XK-E example is an “inbetweenie” as it is undergoing restoration but the seller wants to move it along before completion. This Jag project is located in Watkinsville, Georgia and is available, here on eBay for a current bid of $18,988, reserve not yet met. There is a BIN price option of  $37,000.

There has been an enormous amount of  metal fabrication performed on this XK-E as the seller states, “new floors, inner sills, outer sills, toe kicks, transmission tunnel ( front to back), boot floor, and lower quarters…” While the body appears to be pretty straight, the nose piece looks lumpy and the seller advises that the door skins will probably need to be replaced (reskinned). Most of the trim has been removed, as have the windshield, window glass, and backlight.

The metalwork shows to be extensive and very well facilitated; quality work is evident in many structural areas of this XK-E. Nevertheless, it’s still going to need a significant amount of time and effort to become an operable vehicle.

The 3.8 liter, in-line six-cylinder engine still occupies the engine bay but it is obviously a non-runner. Other than its carburetors, it’s stripped of its running gear. There is no reference made to its internal condition or what it may need in terms of attention – definitely worth further inquiry. The only transmission available in ’63 was a four-speed manual so it’s assumed that’s what’s here.

The interior is where so much of this Jag’s reconstruction is occurring. All of the floors and supports have been replaced, including a single replacement seat back (the other is a usable original). The instrument panel is partially intact though there are some switchgear and gauge vacancies. The steering wheel and column have been removed but they appear to be included with the pile-o-parts that come with the car.

Talk about a jigsaw puzzle! There are a few things here to consider, one is the accuracy and quality of the extensive metalwork, which on the surface, looks good. Next is the engine, there is nothing revealed about its overall condition and potential operation. Finally, it’s the parts menagerie, maybe they’re all present and maybe not; maybe what’s present is usable, and maybe not. And finally, there’s the price, the $37,000 BIN number gives you an idea of the reserve – it’s a pretty stiff tariff for a lot of unknowns. Half completed projects like this turn up all of the time, but anyway that you cut it, it’s like changing horses in the middle of a stream. I’d recommend sticking with your initial steed. Anyone up for this challenge?

Comments

  1. Avatar John

    When Enzo said that the E-Type was the most beautiful car ever made, he was not talking about this one. This one will require $100K in parts, paint, and years of labor. Even some of the acorn nuts on the cam covers are missing leading me to wonder if the “motor” may just be a bare block set in place for the photos. It makes me sad. I saw one of these finished in red with tan leather interior back in the day. It may have been the chief inspiration for my love of sports cars. The ones Enzo was talking about were truly beautiful cars.

    Like 5
  2. Avatar Matthew Middleton

    That’s a 2+2 with the ugly high roof. I wouldn’t bother.

    Like 3
  3. Avatar George Leopard

    An apart coupe with floor replacement and really rusty wheels tells me this spent quite a while outside before work was started. Not worth doing. Find a complete running car in #4 shape and just enjoy driving and working on it. Life is too short to waste it on this type of project.

    Like 3
  4. Avatar MikeB

    Nightmare!!!

    Like 1
  5. Avatar JBD

    Looks like an early coupe, not a 2+2 body.
    Also spare engine is a low compression 8:1 from a sedan. Lots of parts, unless you need a project car, then run.

    Like 2
    • Avatar Matthew Middleton

      Yeah, you’re right it’s a coupe. Still wouldn’t touch it!

      Like 1
  6. Avatar BobinBexley Member

    63. Looks like the structural stuff made of nightmares is solid. Would make a good whip. Badass car for those with the skill set.

    Like 0
  7. Avatar Ricky

    It is absolutely NOT a 2+2!!!!!!!!!

    Like 2
  8. Avatar peter k

    this is a prime example of what to do . I would throw the boat anchor motor in the trash and put an entirely new american running gear in its place from one end to the other. Then put the interior back the way it should be and give it a classy paint job. Then I would drive it.

    Like 0
  9. Avatar Gerard Frederick

    Whether it´s a 2*2 or not is irrelevant, what it is is a nightmare.

    Like 0
  10. Avatar LotusS777

    Looks like a good project for the money

    Like 0
  11. Avatar bobhess Member

    Might be a good project for the money as long as the money doesn’t go above the the present bid.

    Like 0
  12. Avatar A.J.

    Wow, I clicked on the Ebay listing. It sold for $32,000! I for one would love to see this thing undergo the restoration. Maybe just see the wife’s face when this thing arrives?

    Like 2

Leave a Reply to Matthew Middleton Cancel reply

RULES: No profanity, politics, or personal attacks.

Become a member to add images to your comments.

*

Get new comment updates via email. Or subscribe without commenting.