Disclosure: This site may receive compensation when you click on some links and make purchases.

FWD Fiberglass: 1973 Saab Sonett III

Update 2/12/24 – After almost two years, this Saab has been relisted here on craigslist with a $3k price cut! Is that enough to find a new owner though?

From 3/24/22 – I’m on the fence with Saab. I guess there’s really no fence to straddle anymore as they are a fallen flag. Different and quirky, Saab had their devotees and their downfall has been debated often – many point fingers at GM’s 1990 acquisition but I don’t want to debate the past and get off into the weeds. There was a plan for a Chinese-controlled electric Saab under the guise of NEVS (National Electric Vehicle of Sweden) but it doesn’t seem to have taken root. Regardless, one of Saab’s more interesting creations was the Sonett, and today, we have a 1973 Saab Sonett III for review.  It’s located in Dallas, Texas and is available, here on eBay for a BIN price of $9,500 and there is a make an offer option too.

Back to the fence-straddling for a minute, the Sonett is as much as a departure from a traditional Saab sedan as the 1800 was from a typical Volvo sedan. Volvo got the 1800 right, Saab with the Sonett – not so much so to my eyes. The styling just doesn’t flow, the body seems to be a series of components mushed together – and that 5 MPH front rammer isn’t helping the cause any. What I didn’t know was that a Saab III, such as our subject car, was preceded by two previous generations, the first spanning ’55 to ’57 and then the Sonett II covering the years 1966 through 1969. Poor sales ultimately killed Sonett III (’70-’74); there were only about 8K copies assembled in its five model years of existence.

This example is a repaint in its original shade but the seller does mention nicks, scratches, contusions, etc. It’s a twenty-footer, the images present pretty well at a distance but upon closer inspection this Saab’s aesthetic demerits become evident. It’s not in terrible shape mind you, but it could use some appearance help. The seller adds, “There is rust in one section of the trunk and both rockers have rust“.

Originally, power was provided by a 65 net HP 1.7 liter, Ford V4 engine but the seller states that the engine has been altered, “with 92mm pistons, a hotter cam, a Sport & Rally valve train with larger valves but no head porting was done. It has a two-barrel carb with a diaphragm clutch and lightened flywheel…” He follows up with, “it’s quite peppy and spins up fast. Starts right up after it gets warmed up”. The four-speed manual transmission has undergone alterations too.

The interior, which looks surprisingly roomy, seems a bit grimy like the oil change guy has been rolling around in the seats while wearing his coveralls. The seller advises, “It does have an original interior with factory seats with bolsters but it is missing some headliner and trunk panels. It also is missing portions of the door/window seals. Speedo, horn, and behind the grill driving lights do not work but everything else seems to“. He adds that this is an air-conditioned Saab but the compressor, mounting bracket, and hoses have been removed. I do like the old-school design of the instrument panel gauges – no reading glasses needed to scope those. The panel itself is starting to peel or delaminate – there’s a lot of interior clean-up that will be needed.

Interesting car and I wish we still had some of the more eccentric brands like Saab with us, as opposed to fewer marques turning out blander, more generic models. Still, this Sonett isn’t one that I would appreciate enough to own but I’m certain that there’s a Saab aficionado out there that will give it consideration. Might that individual be you?

Comments

  1. Avatar Kevin McGinness

    Brings back memories, worked at a Pontiac Cadillac dealer that took on Saab in the 70’s, I think I saw two of these, and drove one as being a car jockey, there standard sedan was a pretty hot car, way ahead it’s time, would have fit in with the 90’s american cares much better

    Like 6
  2. Avatar Motorcityman

    “We make Jets”

    Always kinda liked the Saab cars, never owned one because I heard parts were on the expensive side like a lot of German and other imports, was raising a family and didn’t have a lot of extra $$$.
    Maybe it’s time?
    Naw, I’ll keep playing with my 2012 Redline Red Challenger R/T 6 speed endangered species model for ar least awhile! (Only 42,000 miles)

    Like 3
  3. Avatar Rick

    Rust is the killer on these cars. If it’s in the rockers, there isn’t much hope for rescue here unfortunately. Especially at the asking price. Shame, I’ve always liked the Sonetts.

    Like 9
    • Avatar Dslad

      Weren’t the 1st Gen Sonetts fiberglass bodied?

      Like 0
      • Avatar John

        Dslad, body was fiberglass, but the chassis, including the structural rockers, was steel.

        Like 7
    • Avatar luckless pedestrian

      So true regarding the rust… About 20 or so years ago I was hot to find one of these to add to the fleet… but all the ones I actually got to look at were going to require considerable metal replacement in the floors and rockers… not an easy task in those cars… gave up after a while and moved on to other things. Did wind up owning lots of Saabs though… 2 classic 900s, a 9000, a 9-5, a 9-3 and a 9-7x (the last one wasn’t really a Saab… just a re-badged GM Trailblazer… but they did stick the key between the seats, which I found amusing)…

      Like 4
  4. Avatar Ralph

    Grew up with many SAABS in the family, including these. For the overall size the interiors are very roomy, with a ton of leg room. It’s a shame this one is so far gone. Maybe would give 2K for it in this shape. (YMMV)

    Like 8
  5. Avatar Ralph

    By the way SAAB is currently supplying an extremely effective shoulder fired missile system to the fighters in Ukraine. They say it is far more effective than what the US has been supplying.

    Like 7
    • Avatar misterlou Member

      Maybe a custom plate? TANKKILR? LIL NLAW?

      Like 2
  6. Avatar Evan

    What killed the Sonett – and the Volvo 1800ES as well – was the cost of US federalization. Both manufacturers were heavily dependent on US sales of their “sports cars”, but by 1973 they effectively had to produce two versions of each car – one for the US, and one for RoW – and it stopped being cost-effective on cars with such low overall sales volumes.

    Like 10
  7. Avatar SaabGirl900

    Dslad–

    All Sonnets were fibreglas bodied, from the Sonnet 1 all the way to the III that you see here.

    They were interesting cars, but the rocker rust scares me. It’s repairable, but not cheap.

    BTW, you can still get parts for Saabs….it’s easier to get parts for the newer cars, but ORIO (the folks who sell parts for Saabs here in the US) are starting to manufacture parts for the Classic 900 again.

    There’s a lot of leg room in these cars, but if you’re broad beamed, you will not be comfortable, as these seats are very narrow…………..

    Like 4
  8. Avatar BimmerDude Member

    “transmission…alterations”? I had a 1969 96 in Northern New Hampshire to start, had to install a used trans when the bearings stopped bearing the rotating loads. The used tranny then started doing the same but I was lucky enough that the New Britain CT dealer had a tech who rebuilt the first tranny with new bearings. I found new fenders (in ~1972) since there were fist-size holes in the originals but I still miss that car.

    Like 2
  9. Avatar Saabatical Member

    I’m 62. Had a 2000 Saab 9/3. One of my favorite cars over the years.

    Like 4
  10. Avatar SaabGirl900

    Saabatical–

    I have a 2000 9.3 five door. She is one of 11 Saabs living in the barn, the garage and the back yard. She and I have been all the way out to Colorado, down to Florida, up to Minnesota and all sorts of places in between. She has never failed me…not even when she ate one of the #4 cylinder exhaust valves. I made it to work, parked her and then called a tow truck to have her brought to a local shop to have the engine rebuilt at 192,000 miles. The engine would have lasted longer if the Dreaded Former Owner hadn’t beaten the daylights out of the car. The tinworm is attacking her doglegs and quarter panels, but I refuse to let her go…she has been that good.

    Like 4
  11. Avatar David Laker

    This fun car earned me my one-and-only CA speeding ticket. Not long after, it coughed up a valve and I bailed. Don’t remember a V-4. Were there other engine options?

    Like 1
    • Avatar Evan

      Not in this version, no. The Sonett II had a two-stroke triple at first.

      Like 1
    • Avatar SubGothius

      The Sonett III always only had a Ford V4, which debuted in its predecessor the Sonett II, replacing the earlier Saab-made 2-stroke 3-cylinder.

      Like 5
  12. Avatar angliagt Member

    There’s two of these in a wrecking yard in Oak Level,VA.

    Like 3
  13. Avatar Margaret A. Soucie

    I have a ’74 Sonett and I am not sure what I will do with it. The body is fibreglass, married to a metal floor ! For a smart company, Saab did some weird things. The floor tends to let go at the firewall and can be a constant repair job. If there is enough good metal to weld to. But the 96’s had the same problem with floor/firewall, rust/separation. I used to have #124 Saab Sonett. A three cylinder engine. I paid $100. for it, pulled the engine, a nice, low milage 875 c.c. with three carburetors. Then sold the car for $200. and hauled it to Massachusetts. I still have the engine and the carbs, used them for ice racing. I would like to have the Sonett on the road, but that floor bothers me. I know of three other Sonett’s in my area, with bad floors, sitting outside, loosing more floor every year. Sonett’s are neat little cars.

    Like 4
    • Avatar Bruce

      Margaret, If you would consider selling the engine with carbs, let me know. I can certainly use them. I own a Sonett II two stroke. e-mail me at sonett1@hvc.rr.com

      Like 1
  14. Avatar Dana

    Loved SAABs (well really the aircraft) and had 95s 96s, 99s and a 900. All were reliable and for me importantly safe. Some rust problems with the 96s at front window seal, leaked into cabin and drove my wife nuts. Sad that they went out of the car business. Loved the odd styling of Swedish cars. Saw a 96 from Mexico that had an electric conversion so maybe they should consider bringing it back maybe with some upgraded styling. Never liked the Sonnet, too ugly, friend bought one and had lots of rust and fiber glass issues in what he called his mini-vette (lol).

    Like 0
  15. Avatar LCL

    When and why did Ford make a V4?
    Anyone?
    What else was it used in?
    Seems really compact!

    Like 0
    • Avatar luckless pedestrian

      @LCL… The Ford V4 that wound up in the Sonnet was produced from 1962 thru the early 80s I believe… German origin… was used initially in the Ford Taunus and then in other German Ford models… Some refer to the engine as the “Taunus V4″… Had non-automotive industrial uses too…
      Not to be confused with the Ford’s “Essex” V4 designed and produced in Britain during the ’60s and ’70s…

      Like 5
      • Avatar LCL

        Thanks.
        I learn every day from BF readers.

        Like 0
    • Avatar SubGothius

      History and details about the Ford Taunus V4 engines here:

      https://en.wikipedia.org/wiki/Ford_Taunus_V4_engine

      Interesting to note it was originally developed by Ford US for a “Ford Cardinal” FWD compact project that they abandoned (in favor of the Falcon), then transferred to Ford Europe, where it ultimately evolved into the 3rd-gen Ford Taunus 12M (P4). More about that and the V4 engine here:

      https://www.curbsideclassic.com/curbside-classics-european/automotive-history-how-the-american-ford-fwd-cardinal-became-the-ford-taunus-12m-from-dearborn-with-love/

      Apparently the V4 configuration was chosen to minimize front overhang in longitudinal orientation with the transaxle mounted behind, and the 60° cylinder-bank angle was chosen (after abandoning an initial Lancia-like 20° angle during development) as readily lending itself to a later V6 variant, which did eventually come to fruition as the very long-lived Ford Cologne V6, produced for nearly 50 years.

      Like 3
      • Avatar LCL

        Thanks too.
        I will read those links.
        I got thinking about the Ariel four and wondered if this Ford motor could fit a motorcycle…crazy, but…

        Like 0
      • Avatar jwaltb

        What Lancia had a 20-degree V angle?
        I’m aware of narrower and wider ones.

        Like 0
      • Avatar SubGothius

        @jwaltb
        The 1922-31 Lancia Lambda had a V4 with a 20° bank angle, as did the 1939-53 Ardea, but I was speaking more broadly of narrow-angle V4s in general being a Lancia signature, up through the 1963-76 Fulvia with its 13° and 11° V4s.

        Like 0
  16. Avatar Karl

    Saab built some very attractive vehicles during its time but I never considered the sonnet of and rendition an attractive car truthfully it just plain homely.

    Like 0
  17. Avatar Victor Pestone

    I had a ’71 before the crash bumpers. It was a fun car to drive. Lots of low end torque and you sat low to the ground, so you felt like you were jumping off the start. Goofy mechanical headlamps with a torque rod to raise them. The right headlight always dipped and was a pain to fix.

    Like 0

Leave a Reply to Bruce Cancel reply

RULES: No profanity, politics, or personal attacks.

Become a member to add images to your comments.

*

Get new comment updates via email. Or subscribe without commenting.