In 1957, Ford took a Ranch Wagon and removed the wagon roof. The result was a “coupe express” that combined car styling with a pickup truck’s utilitarian appeal. In fact, the 1957 Ranchero had a cargo capacity of 1,190 pounds, putting it in the same class as a 1957 Ford F100 pickup, and it came with a 6-foot bed to boot. This rare Interceptor edition has been in storage in an Arizona garage for 40 years and is now available here on Facebook Marketplace for only $3,500 in Coolidge, Arizona.
A few caveats, though. It has no engine and no title. The seller claims you can get a bond for $450, then go to the DMV and get a title. The engine is another story. The original Interceptor special came with a 352 cubic inch V8 and a Holley 4160 4 Barrel carburetor. Of course, since you wouldn’t have a numbers-matching engine, you could always stick a 260, 289, 302, 351, or go all the way and put a 5.0 Coyote in it. The original 3-speed, column-shift transmission is still in the car. I’d assume villagers would show up with pitchforks and torches if I suggested an LS swap?
According to the seller, the car is very complete except for the engine. The front bumper and grille are available, and it is believed that all the stainless-steel trim is also present. The interior is not in great shape and needs a lot of TLC to get it back to an acceptable level. The rear end is a Ford 9-inch unit, and if it has the original gear set, it should be a 3.70:1 ratio. The body is straight, and along with the surface rust you can see, there seems to be some bubbling on the driver’s-side rocker panel. However, for an Arizona car, it’s not bad.
As a former ’65 El Camino owner, I never gave much thought to the Ranchero. This one is just rare enough to be a worthwhile project, though. I can see it as a restomod or even just a restoration, since you don’t see Interceptor Specials every day. According to Hagerty, a good 1st Generation Ranchero averages $22,000 these days. So, for $3,500, you could get a pretty good deal. Are you ready to put this Ranchero to work for you?






Bucket list car for sure. It’ll be gone in a flash at that price.
I love the taillights of Fords from this era.
Judgeing by the value completed. this looks to be a labor of love and not for profit.
Hope someone brings this back.
Thanks Kevin for the write up. I love fist gen Rancheros and El Caminos. In fact, I love all Rancheros and El Caminos. This price is right and right up my alley being a Ford truck guy and muscle car guy. Honey I need to move some trucks around or possibly have to move your car outside, I’m going to Arizona for a bit. (Hope she doesn’t see this) Without a #s matching motor I would try to find an original 352, if not maybe the 5.0 or 5.8. Another option would be find a 5.8 PCM with the HO GT40 heads. and build from there.
As far as putting an LS in a Ford, Why not a Dongfeng or Changan motor to really show a low moral compass. Now bring on the torches and pitchforks.
Being from Texas I never heard of the Ute terminology that y’all call the El Caminos, that being said I’m just wondering why y’all don’t call the Rancheros the same thing? Just wondering.
I love the yall.
I used to talk with our steel supplier down in Houston from up here in New England.
One day the young lady from down south, in the sweetest southern accent said.
Yall talk So damn funny and faast too !
In Pittsburgh they say “yinz” instead of Y’all.
The term “UTE” comes from Australia. It started in the mid 1930’s when a lady told a Ford Salesman / Engineer that “She wanted to be able to go to church on Sunday in the same truck her husband took hogs to market in on Monday” Thus Ford of Australia designed her one and it was a big seller.
Okay thanks! Still have only seen people calling a El Camino that on this site but not Rancheros. Never heard that term before until I started looking on this site. 👍
Suppose someone suggested putting a Coyote motor in your 65 el camino? You wanna talk pitchforks, yeow, the bowtie boys would have you tarred and feathered at the very least. Double standard? You bet! Anyway, it looks solid and is well worth the effort to resurrect or restomod. New front discs, plenty of room for whatever FORD motor that you want to put in it. Upgrade the interior, nice 15″ or 16″ (no larger) wheels, straighten and smooth the body, add a nice 2 tone paint (50s vibe). What a nice ride for someone.
Uncle Larry, I also have an ’08 Mustang and a ’10 Edge, so I am not a Chevy loyalist by any means. I have some friends that put a coyote into a ’70 Mustang and swore left and right that they would never attempt a coyote swap again and not just because of the shoehorn fit. They literally said an LS swap from now on. No pitchforks from me, though, you are very right about loyalty and I see your point. Thanks for your comments. Also, check out the 68 Ranchero that I posted in the last few days, super nice 390 GT that has a real decent price in my opinion.
Who knew that the 1958 Ranchero continued to use 1957 tail lights? (Not me)
Not just the tail lights!! Probably the rear fenders and tail gate also??
They used the 57 taillights as the 58 ones were horizontal and wouldn’t work with the tailgate.
The 58 wagons used the horizontal tailights and folded down with no problem, so I don’t think that was the reason. I have heard that it had to do with the dies that were set up to stamp the top egdes of the bed sides, but the Courier also used the 57 tailights in 58, so that reason makes no sense. I have also heard that the 57 tailgate was wider so better suited for a truck, but it is the exact same width as the 58.
I think Ford had a bunch of leftover bodies that they wanted to use up, simple as that.
The 58 Sedan Delivery was the same way plus the delivery used roof sheet metal unique to just the delivery. Also both cars were built on a shorter 57 300 chassis. If you remove that trim from along the top edge of the bed of the ranchero you can actually see where Ford cut the wagon roof off
The sedan delivery roof for 58 was the same as 57. In fact the sedan delivery body, except for trim was exactly the same from the cowl back in both years. I think this gives even more credence to the theory that Ford was just trying to use up 57 inventory in 58 and that’s the reason for the round tailights in both years.
Customizers would sometime apply ’58 Edsel wagon taillights to early T-Birds and Rancheros, which is why so many of the wagons no longer have their taillights intact.
I did! ;) If I recall, so did the 1958 Courier (sedan delivery).
Good Story on the Ford Rancho,However, The pictures are of a 1957 Ford Rancho. Looks like it can be saved. 1959 was the last year as far as I know.. would Love to have one..Keep up your great work.Thanx Kevin..Austin Texas.
The pictures are of a 58. You may be looking at the rear end pic and thinking it’s a 57. As discussed in this thread. 57 and 58 used the same rear tailight setup.
There is a good atrical on bonded titles on the web site VinScribe.com. Entitled Bonded Title Risk in 2026. A must read for anyone considering a boned title.
here we have once more another lazy seller. if it so easy to get a bonded title the do it. square tires. how about rounding up some used 1s that hold air and put them on. all this guy is looking to do is stick out his hand and have a fool drop cash in it.
I like this Ute!!!!! basically it is an all there project. The title should not be a problem as there are companies out there who specialize in getting lost titles. A modern (late 90’s) 352 would be my engine choice, if that 3 speed could handle the torque, if not a 4 speed. Although for the many of you who cannot drive a stick, you could use the Automatic that comes with the above 352. An experienced DIY rebuilder could build himself a great back up daily driver, cruiser, and a neat event truck out of this.
No Mel 430 motor? E-475?
I have a 58 just like this. This has the 3 speed w/overdrive just like mine. Can see the overdrive handle sticking out under the dash just to the right of the steering column and to the left of that gauge pod. Very strong trans. Borg Warner T85 with R11 or R12 OD. Used same case as 4 speed T10. Very fun to drive with the OD.
The 352 Interceptor rated at 300hp in 58 did not come with a Holley. It had a unique Carter AFB with diaphragm operated secondaries. Carter 2640SC.
Ford used the 57 station wagon rear end on the 58 Ranchero and Courier for some unknown reason, which surely came down to economics. If you do a search there are many bogus reasons given, none of which make sense.
I was wrong. Ford used both the Holley 4160 and the Carter 2640SC on the 352. They used the Holley on the 332 but not the Carter. It was the first year of the 4160 with the single merering block. The 4150 with two metering blocks had come out the year before on the T-Birds with the 312.
I have a 58 Ranchero like this, I put a 312 Y block out of a 57 T-bird in it with a 63 four speed transmission and a 356 9″ rear end. I’ve never seen one with a 352 in it but would be cool, a 390 would be also be good.
A 390 would be cool, absolutely. But, seeing how there’s no replacement for displacement, a 428 medium riser would really make the grade.
The term “coupe express” comes from Studebaker who sold pickups from 37-39 under this name based on a car chassis, beating GM and Ford to the concept by 20 years. In fairness, there were other companies that did pickups based on a car chassis around the same time, notably Hudson.
Nice input, Dore.
I will have to waste more time on google for info.
I think a nice big Pontiac motor would do for this pickup. Maybe a 389 from the 60s. Even a 430 Buick would make it purr.
BUT I could be forced to insert a 406 Ford motor.
Well, I don’t have one of the first Ford Utes. But I do have the last. A Ford Durango. If you have never heard of one. Google it! (Only 212 built) Tailgate tail lights were an issue on Durangos also.
Thanks for the tip.
Looked it up and saw Barn Find listing from May 2025.
Not a bad looking little thing.
I like how they wrapped the tailgate around the body, so it is the entire width.
If they had gone full scale, the Ranger may have been delayed.
So is it just the engine, if it were there, that makes this an Interceptor?
When Ford intoduced the FE in 58 they marketed it as Interceptor. The 332 2 barrel carb version was Interceptor V-8, the 332 4bb was Interceptor 332 Special V-8 and the 352 4bb was interceptor 352 Special V-8. There was not a 352 2bb in 58.
Only the cars with the 352 received the tag on the glove box door that said Interceptor Special V-8.
Thank you sir
For more reading on ’58 Ford Interceptors with “Precision fuel Induction : https://xr793.com/wp-content/uploads/2022/12/1958-Ford-Interceptor-V8.pdf
This car with the 352, 3 speed w/OD and Custom trim is very rare. This is a good buy even without the engine. I don’t need another project or I would already be trailering it home.
As I mentioned before, I have the exact same car, only mine is black. When I got the car I noticed that the color of the digits on the radio faceplate and the surround trim did not match the rest of the dash. Turns out the radio was from a 59 Ford. I’ve looked at the car in this listing very closely. Ironically the radio in this car looks also to be from a 59.
This car also has the padded dash which is also rare. Mine no longer has the padded dash but because the unique edge trim that was used with the PD I know that it originally came with it.
Hope someone that can appreciate this car gets it.
Since the 352 is an FE motor, it makes more sense to use another FE, say a 390.
Put a 351 Cleveland in it, upgrade the brakes, wheels and tires, freshen the interior.
Then just enjoy it
This would be so cool restored