Said to have been sitting for 70 years, this 1938 Graham here on eBay is a tough car to put a price on. The seller makes a valiant effort to tie his car’s value to other examples that have sold, but rarity and scarcity of parts can cloud the real-world cost for bringing this one back to life. The asking price is $11,499, which is quite a number for such a project.
Since the “Sharknose”-style body was only produced for two years, it’s not surprising that the asking price is what it is. These cars were ahead of their time, with streamlined bodies that looked like nothing else on the road (other than maybe the Chrysler Airflows). The Graham-Paige company was also an innovator in the field, using supercharging as a means to increase power.
There’s no word if this example is equipped with the S/C engine, but I doubt it. I’m sure the seller would have taken the opportunity to ask for more money if it was among the rarest examples of a Sharknose. To be fair, however, many of the project-grade examples have been hot-rodded and customized over the years, and this one looks like it remains largely stock despite its parts-car status.
Although it has extensive cosmetic needs and rust appears to be extensive in the chassis, the Graham does show signs of completeness, with the engine still attached (no word if it’s original) and some trim pieces included. This will be a massive undertaking to restore, but I suppose the old adage applies: find me another one. Do you think the seller is realistic with his asking price or is there room for negotiation despite the rarity?
buahhahahahahhahahahh 11k large for that buahahahahahahhahaha
To dream the impossible dream…
It’s NOT a car, it’s an idea that a car, in this case a Graham can exist in that space once every single part is replaced with a good part! And I can get my own ideas for free, no need to pay for this one!
uh……..no thanks. not that not today
I looked at the other items this seller has listed. They seem to be pretty proud of everything they own.
If this Graham, in it’s current condition, is worth anything near 11+K, then my fully restored, documented, numbers matching, registry, 1947 Indian Chief Roadmaster is sure to hit the block at no less than 150K, starting bid. My expectations are not that lofty, nor should the seller’s be.
$800.00 maybe…build a gasser and give the rest to a restorer! :-)
I contacted a friend who knows Grahams and Cords well. (He was amused) This one was for sale at $4500 with no no takers and it was in much, much better condition and more complete I don’t think prices have come up that much in the last year..
http://autoweek.com/article/classic-cars/does-sad-1938-sharknose-graham-deserve-second-chance
So this would seem to be way overpriced.
Could be used in a horror flick.
Are they kidding 11k for this Graham or is this an April fools joke . I’ll bet there’s no bottom left on this car and no pics of the floor or trunk which are probably non existent . Good luck to the sucker in transport !
Greetings All,
Must be nice to want…..
Cut the nose off and hang it on the wall………
$1250.00 at most. Plus you have to move it somehow. This is darned near a parts car. Condition 6. Number 1 cars top out at $35K. You’re underwater on this immediately, even at $1250.00. This guy’s not even close on price here.
This would be great as a coversation piece in a pond. Of course let that great nose stick above the water line.
I see what you did there. Nicely done!
It also reminded me of the students at my high school that took (stole) a Mercury off the dealer’s lot, mounted it on a platform, and then floated it in the pond in front of my high school. It floated. For a while. It then sank to the bottom. I don’t remember if they were ever caught.
No chance.
Start with something a little easier
To readers guess what this is ?
Sadly, it looks like it was a Rolls Royce or Bentley.
Sadly wrong ,but was known as the Triumph Razor Edge, with a proper name of Triumph Renown . This particular one may end up in Italy.
As I recall, it was one of the very rare (<200) "long wheelbase" Triumph Renown Limousines that, sadly, someone apparently tried to turn into a "Munster Koach"; I fear this car also was/is destined for little more than parts-car status, given a: the extreme modifications that would have to be undone and b: the potential to scavenge some fairly valuable parts (headlamp units just might be worth big money).
Your answer is spot on. Great comment . A+
Was sold to Italian buyer / restorer, sadly did not pick it up , may now be destined as a parts car for Triumph Roadster. Engine fits TR3 just shy a couple of HP.
KIng of the Road, Lucas ,Prince of darkness headlight, grille, radiator cap are =$
I was going to buy and old jag and rat rod it. It’s a “Haloween Car”
A Delahay?
Bob
Obviously the seller misplaced the decimal point, needs to move two places to the left.
If you could get it for the right price this could be made into a restomod. I’d use the entire undercarriage out of a 1990’s impla. There is alot of metal work but some of that could come out of the impala. As I said you’d dam near have to have this given to you
As others have said, way, way overpriced! $1,000 would be overpriced. Not even a desirable body style!
Didn’t Graham use ’37 Cord body tooling for these cars?
Or maybe that was just the Graham Hollywoods….
At least the comments are entertaining. The car not so much.
Triumph Renown.
1951 Triumph Renown Razor Edge 10/10
We’ve lost our minds. Seller should PAY someone to move it.
Why would you leave a car like this to sit out and decay? Apparently the Internet just came to his town and discovered he had some rust to sell!! Get out the sunshine pump for these people!!!
This is really kind of sad. It just shows how out of kilter the hobby has become. Just too far gone, regardless of what it was. I like cudaman’s idea, restore the front end ( if possible) and make a fireplace out of it.
I have one perfect, used, intake valve left over from an upper cylinder job on a 1977 Ferrari 308 GTB Polyesther. Great project for the right person. Rare, $12,500, postage included.
I agree you must be Indian origin and have mistakenly put a comma in where you should have used a full stop $12.50 , I can turn it into art. Please forward Priority Mail
Work of art should be left in the rain to RIP. Rust in Peace
How many grams does it take to come up with this price?
An ugly car when new! 11,000 for this rusted out piece of crap? We use these junkers for target practice.
Help…I need drivers side front fender with headlight bucket assembly or just the headlight unit. Any leads would be much appreciated,
Thanks abunch ,
Fran Klotz
I know its hard to put a price on the graham brothers sharknose. It’s true that the price is high but its funny if this was a Camaro or chevelle or mach 1 people would jump… My shop Frank’s Restorations (FB) is in the middle of a complete assembly line restoration of a 1940 4 door model 108 almost being the last one ever built on assembly line, now we bought our rust bucket for 2000.00 with all papers. It will go for 50.000.00. Its not an easy build but it is a full restoration every nut and bolt every screw wire spring etc. Completely restored or replaced with exact parts… So may he sell there is a buyer for everything at the right price.. He will lower till someone buys. Good luck on your sale.. Grahams are few.
$11,000?! I would start the negotiations with “How much will you pay me to take it off your hands, and go from there. Why pay so much when you can get a drive-able, rust free ’38 Graham for $11,000 or less?