
The 1971-77 Chevrolet Vega was a well-thought-out product launch, but some shortcuts in execution led to reputation issues. Like premature rusting and overheating engines. This 1975 example seems to have escaped those issues, having had a 1950s Corvette V8 replace the troublesome inline-4. Located in Tenino, Washington, this potent subcompact is available here on craigslist for $7,500. Thanks for the tip, Rocco B.!

Chevy never tried to soup up the Vega except for the limited-edition Cosworth Vega of 1975-76. But they did sandwich a V8 into the Vega’s semi-successor, the Monza, which ran from 1976 to 1980. The seller or a prior owner decided to ditch the aluminum-block 140 cubic inch inline-4 that early Vega buyers usually had bad luck with and replaced it with a Corvette 265 V8, circa 1956, the second year available in any Chevrolet.

We assume this V8-powered Vega runs well and also has a Saginaw 4-speed manual transmission. The claim of an odometer reading of 137 implies this was a recent transformation that hasn’t seen a lot of use. Or it could mean the car has 137,000 miles on it. Besides the new powertrain, this Vega also has some new front suspension parts, including the shock absorbers. The 265 has a 4-barrel carburetor with a new intake manifold.

The body and paint look good, though the latter may be faded or sprayed to appear that way. The interior is in exceptional condition, with the storage area under the hatchback looking brand new. So, besides going fast, you should be able to do it in comfort as well. If Chevy had offered a V8 in a Vega back in the day, would you have bought one?


I like this – all ready and prepped for new owner’s paint choice.
I do question why the seller would transplant this neat choice of V8, with such a grotty looking exhaust manifold (prolly both). Buzz kill, or at least buzz diminisher…
I had a 72 with a late 60’s 350 and it had old ugly looking manifolds also. The guy I bought it from said he used the stock ones because it didn’t require any cutting of the firewall.
I suspect that the traditional “ram’s horns” exhaust manifolds wouldn’t clear. And where are you going to find original 265 manifolds that look good. I believe that Hooker actually makes a header for this application. But ground clearance then becomes an issue. I sure hope that they upgraded the rear differential.
It’s puzzling that he would choose a 265 SBC, especially when 327s and 350s are likely more plentiful. This must have been a low-budget conversion.
If I were going to do a V8 swap, I’d look for one of the aluminum-block SBCs to cut the extra front-end weight down as much as possible
And I would at least install disc brakes on the front, if not all the way around.
Still, it’s a neat little car and, with all the “Ts” crossed and “Is” dotted, ought to be lots of fun.
It was free ?
I had a Vega, it was fun to drive on a winding road–but kinda gutless. The engine was so bad on burning oil it had an auto shut off if the oil got to low, I used a lot of drain oil to keep it going. I think that he used the 283 because it was installed way back when. I think that if he used a strong 327 there would have to have frame modification. My brother bought a Cosworth Vega and that little buggy could –Jump–I think that if GM had put more into it , that could have been a great American sport car–but that’s just me.
I know a guy that has one of every color made and an extra black one, all like new
White faced gauges too, that is one nice interior and all for 7500 with a V8? I wonder what it would be like with the Buick aluminum V8?
The seller probably had that 265 sitting under his workbench for years, waiting for a project. Still plenty of power for this light car. I haven’t seen a clear distributor cap in the last 25 years!!!
You are right, the engine was probably sitting under a work bench and used because it was free.
There are several sources of clear distributor caps, Speedway motors and eBay have listings. They are surprisingly inexpensive.
Steve R
If everything is sorted mechanically, it’s probably fun to drive. However it would be perfect to buy as an unfinished project because improvements could still be made.
Seems like simply pulling the 4 cyl. and replacing with a v8 buys you nothing but problems with a Vega. Nothing about the car is up to the extra power and weight. Maybe if you keep the power way down it’ll live for a while, but that sort of defeats the purpose.
What? Do you feel the anemic 265 is something to write home about?
The sky will not fall for the rest of the car with that motor in it.
Hood pins at the back of the hood. That’s novel.
hood hinges in front, opens towards the front of the car
There’s not much love for LS swaps among Barn Find readers, but some of the GM SUVs came with all aluminum LS engines, though they are still about 250 lbs more. The Corvette, GTO did too, but you would pay a lot for those. Subframe connectors can solve strength issues if that’s a concern. After all the Monza is a unit-body car too and GM sold those with V8s.
Not too bad, nice interior. Cash talks.
Back in the day, as we older folks say, we used stuff that we had, or was cheap. Any small block would work. Aftermarket sold installation kits for this. Probably used stock exhaust manifolds for ease of installation or saving some $$. Love that distributer cap!!!
As long as I’m here, I’ve had some swap ideas.
How about a 240 z 6 in an early 6 cly nova ,or an independent rear end from a C3 corvette uner a 68 to 72 nova ????
Back in 1977 I was 16 and an older friend of mine installed a 327 in his 75 Vega, he used to give me rides home from pool hall since he lived 1/2 mile past my house. He scared me a couple times showing me the power that it had. I drove it a few times By 1980 the front suspension was shot and he junked it. It was fun while it lasted.
I would have bought a Vega back in the day with its four cylinder. I always liked the looks of it, and enjoyed driving the ones I drove. I could afford a Camaro in 76 though, and I bought a 77 that year.
This vehicle needs a lot of work to get it roadworthy, including a 5 lug wheel conversion. It appears the engine was just dropped in with not much attention to detail. As someone previously stated, there isn’t even a nice set of headers installed. I do envision this smoothed out and painted hugger orange with black stripes and a set of 8” Corvette rally’s. But there will be a ton of mechanical and body work completed to get this little pup dialed in.
The builder probably didn’t want the noise or the heat of headers. Ground clearance is also reduced. Or maybe he was just too cheap!
One of the critical and difficult points at a Vega V8 conversion is the clearance of the steering shaft with the exhaust.
Most likely all headers dont clear it correctly and especially when you use such an uncommon engine as done here, you cannot be picky and need to be happy, when it works.
I agree, that a 5-lug- conversion would be good, but maybe he wants to keep the sleeper look with the stock wheels.
Overall, this is a good offer, when the car basically runs fine. Paint can be done as the buyer prefers.
From what I can see, the front suspension has already been beefed up for that engine, seeing the orange frame rails (it also states that in the comment). that 265 is probably light enough that the weight difference with the new suspension can handle its current situation. It does look clean, and yeah, if you want to get picky, they could have added a “nice set of headers” or just cleaned the current ones up. I do believe it is already roadworthy, given that it has a Washington State Collectors Plate (in a way, it is funny to see that, given that it is not original, but the replacement engine is more of a collector item than the body, it being 19 years older! LOL). Personally, I’d leave the 4-lugs alone – there simply isn’t enough added weight to make it worthwhile, and I always liked the look of the sport wheels on Vegas at that time. Putting Corvette wheels on it would ruin the original look and gives it a more “sleeper” look without the base level rims and hubcaps. There doesn’t seem to be any bodywork needed, all of the seams match up surprisingly well and that only a coat of paint (hugger orange would look very good on it!) is needed. (Another note – Washington State DOL allows collector plates on a vehicle that is at least 30 years old, but you can only drive it for 3,000 miles in a year).
You know it’s kind of funny that GM had no issue with the 4 lug wheels on the thousands of V-8 Monza’s, Starfires, and Sunbirds they produced from 75-80
The same bolt pattern as 4 lug trailer wheels and some British cars.
I like it.
I had a 1975 hatchback that came factory with a 3 speed in 1979.We installed the first 327 and put a 4 speed in it.And immediately tore the rear end out of the car cut down an old camaro ten bolt and then\n We run frame supports underneath the car. When all was said and done, the car had about 300 horses under the hood and was stable on the ground. We put impala disk brakes on the front and rework the car and it was a lot of fun. I wish that I had kept the car but I didn’t, but this car seems to be something that A lot of fun to drive , I would immediately get rid of that motor and put a three fifty in it and just drive the dog out of it , to all of the state needs to go
I prefer the looks of the 71-73 Vegas over this style. If you drove this car like a sports car, as in no holeshots, power shifting, etc it should hold up reasonably well. I have a mid-engine Corvair with a 350 pushing maybe 400 or so HP using a relatively stock Corvair transaxle. It does have a 4 spider conversion, but other than that pretty much stock. I have a friend that raced his conversion in SVRA and other racing organizations for years and had little to no breakage. Over the years he increased HP and eventually went to a C5 Corvette transaxle with a Jericho 4 speed. But yeah, I’d love to find an early GT. Hard to find one that isn’t a pile of rust with paint holding it together. I’d do a V6 conversion with a little boost.
While the Vega was junk, this is a nice upgrade to that clunker 4 cyl. Actually it wasn’t a bad looking car when you put the right wheels on it. The Vega steel mags were good looking with trim rings. I have a decent set with original trim rings and center caps. Anybody want them? I’m in Vermont. I would like to drive this car and see what it does. I wouldn’t buy it, though….too many bad memories with with two girlfriends who both owned one….. Mechanical bad memories, not with the girls!!!
Back about 1980 a friend of mine bought a Vega GT with a 4 speed manual transmission for under $10. When I followed him home I had to drop back 1/4 mile because of the smoke! He used over a quart of oil for less than 10 miles! We pulled the engine and delivered it to a local speed shop where for $200-250 they installed iron sleeves and gave us new pistons. The engine size decreased from 2300 to 2000 or 2100. The car ran like a watch after that and he had it for years. He carefully kept all of the bills and receipts so he got top dollar when he sold it. I have since learned that GM could have built that engine with the cast iron liners for about $10 more. Possibly the biggest mistake GM made back in the seventies.
At the time, the technology looked good, and it’s still debatable whether or not the oil burning was from the lack of steel sleeves, or lack of good oil control from the valve guide seals and the tons of oil pumped to the top for the overhead cam. As we know, many late model vehicle use the same technology today.
Interesting point about the seals. Obviously when we rebuilt the engine it got all new gaskets and seals. So we didn’t know if the new liners, pistons and rings did the trick or the new seals we installed when rebuilding it.
It’s a cool little car and I like the V-8 in it! Yeah, I’m kind of curious why they chose that smaller V8 over the other ones but it seems like some of you guys have a theory on that
As far as the exhaust manifolds go, I’m wondering if the seller didnt put headers because of clearance issues? If you look carefully, the exhaust manifold are actually put on reversed. I’ve seen them do this on Shelby cobra replicas so that the exhaust is positioned in a strategic way for the side pipes.
Good price for a fun project!
I had a v8 vega in the 70s….it was a screamer. first time I took it out and really hammered it I pulled into a gas station and the drivers door wouldn’t open.had to crawl out the passenger side. Yep subframe connectors were a must. I think Don Hardy made conversion kits
all that work to put a v8 in this thing and they put a 265 in it. are you kidding me? what a waste of man hours.
I had a 1973 Vega that had a 283 V8. When you floored it, it would try to go sideways, very scary! This was 1979 and was getting pretty rusty already.
When was the last time you had that much potential fun for$7500 bucks?
Saginaw 4 speed . The transmission that came with that Vega. Weak.
Every sbc is a Corvette engine. There are more Corvette engines floating around than actual Corvettes made
There are many comments about the low horsepower 265/283 engines. As it currently sits. This Vega would be a very smooth running, (versus the original engine) torquey (more than originally supplied) engine making this a very nice (albeit not terribly fast) driving car. I’m sure there are rough corners/edges that need to be ironed out. But any improvements that the new owner may want to make. Can be done a few at a time while still using this car as fun transportation. Put the big engine in after all the upgrades are completed.
As with all the cars around the timeline, the table looking bumpers killed the vibe for me ! If this was a small bumper cat it would look a lot better !