
Patina is usually a love-it-or-hate-it thing; there is rarely a middle ground for that look. Surface rust is one thing, but actual rust holes are most often a hate-it thing for buyers looking at a used vehicle. This 1973 Chevrolet C10 Custom Short Bed with a 350 V8 and 3-speed manual is listed here on eBay in Norman, Oklahoma, and the seller has a $7,900 buy-it-now price listed, or you can make an offer.

Having grown up in the upper Midwest with rusty vehicles my whole life, I hate seeing such a cool truck as this short-bed Fleetside C10 Custom having rust on it. I never would have expected it on a truck from Oklahoma, even though the Norman area gets around three feet of rain a year and it’s humid in the summer, so it isn’t as dry as I think of when I think of Oklahoma. Hagerty is at $12,100 on the low end, so this could be a great buy even with the rust work that’s needed. I believe this color is Skyline Blue, the lightest shade of blue for this truck in 1973, according to page 11 of this 1973 Chevrolet pickup brochure.

The third-generation C10 (and related 4WD K10) trucks were made for model years 1973 through 1991, and they’re tied for my favorite generation of Chevy trucks along with the previous generation trucks. Just about every replacement part for every square inch of these trucks is available in aftermarket catalogs, so fixing the rust shouldn’t be an issue if you have a welder and some patience. Watch out for hidden hornet’s nests, though!

Most of us have done patching like this. The seller has provided excellent photos of this truck on all sides, top to bottom, very well done! I can see why the short-bed Fleetside is the most popular pickup in this era. Here’s what the inside of the bed looks like.

Both heat and humidity play a role in the condition of this one-owner truck. Or it was said to be a one-owner truck before the seller got it and started using it as a daily driver over the last six months. That dash is as rough as any that I’ve seen, but you should be able to find a nicer one. If the floors are solid, that’s really all that matters inside. You don’t see a floor shifter here because this one has a column-shifted 3-speed manual. I’ve never driven a vehicle with a V8 and three-on-the-tree, but I’d love to try this one.

Power steering should make this a nice driver with the 350-cu.in. OHV V8 there. I don’t see power brakes, but easy steering is more important than easy stopping, right? Today’s drivers are so attentive and cautious that brakes are almost an afterthought anyway (crickets). 175 horsepower and 275 lb-ft of torque go through a 3-speed manual to the rear wheels, and the seller says this truck was ordered by an older gentleman in Arkansas and is a dependable driver. I would love to pick away at the rust and turn this one into a gem. I love this era of Chevy pickups. Would you restore or restomod this truck, or just keep it maintained and drive it as it looks now?





A truck for the working stiff, and a classic one at that. As noted has some potentially concerning rust issues to deal with as is seen in the underside shots but no frame rot apparently, good news. Might dicker some on the price if possible but the potential is definitely there. Clean up the serious rust, make the interior useable/livable, drive it then lay on some paint later.
Landed another good one here, SG.
You’re right Nevadahalfrack, and what a happy working stiff I’d be with a 350 and a speed on the column. If the frame checks out, I think this would make a solid foundation for a restoration or at least a runner for erands and stuff. That wasps or hornets nest may be their attempt at body filler in that cab corner. I think I’ve only ever seen one other 350 V8 with a 3 speed on the column so thats got to be rare. I would try to source an original set of hub caps ( they were probably white painted ones if this is a Custom Deluxe, but they came in chrome too, and also full wheel covers on the higher end models). My father had a white ’73 one ton in white with I think a green interior from what I remember, so this one is a little closer to home for home. Great write up Mr. Scotty G.!!! I enjoyed it.
When I see first year square body in a short box and 3 speed column shift, I immediately go watch the second chase scene from the movie “The Driver” from 1978. You see Ryan O’Neil shift those gears! There are continuity issues, as you see a ’73 Malibu, a white Ford Country Squire and a Blue 1st Gen Cadillac Seville several times, but it is a fun watch. I even think there is a salute to the truck used in the movie ‘Duel’, albeit a clean version. Maybe Geo or Howard can confirm the model. Tell me what you think:
https://youtu.be/O0Hcsww2x84?is=Nadxz8_qLBCGrMaF
He seriously drives the wheels off that red Chevy stepside. It was a shame to see if get so banged up. But if you notice towards the end, the way the hood is dented, the truck looks angry, especially when he hits the headlight switch on.
Currently @$7900!