
We don’t know if this almost perfect-looking garden tractor is original or if it’s been restored, the seller doesn’t mention that. In any case, it looks incredibly nice and seems like a good deal, too. This 1970s John Deere 300 garden tractor is listed here on Facebook Marketplace in Kaukauna, Wisconsin, and they’re asking $750. Here is the original listing, and thanks to Lothar… of the Hill People for the tip!

John Deere advertising (and there isn’t much on the 300) says that this “Lawn and Garden Tractor has a rugged 16-hp engine at your command to get big jobs done in a hurry.” This model was made for the 1975, 1976, and 1977 model years and this example looks like a jewel. There is no mention as to whether it’s original or has been restored or partially restored.

I have to believe that at the very least the green bodywork has been painted, but that’s just a guess. Jamie Palmer is our resident long-time John Deere Company engineer and expert, but I’m not sure if he was with the lawn and garden tractor division or not. Still, maybe he or one of you can shed some more light on this model; there isn’t much info out there on them.

Something is missing in that hole next to the bottom of the dash and behind the shift shaft. I’m not sure what it would have been, but whatever it was, it’s gone. This model has a dual-action hydraulic lift and can handle rear, mid, or front-mounted implements. Built in Horicon, Wisconsin, this tractor would have cost $2,695 in 1977, which is $15,010 today! Ouch.

The 300 is powered by a 588-cc Kohler 16-hp single-cylinder, and it’s backed by a hydrostatic drive system with infinite forward and reverse, sending power to the rear wheels. At just under six feet in length and 700 pounds, this tractor has new tires and is said to run well. Would any of you have a need for a small lawn and garden tractor like this JD300?


The 300 is a good tractor, and that’s a good price. Pretty sure it’s original, not restored; one of the first things people replace is the seat and that looks original. The missing items are for the deck, I think. I worked with commercial mowing and golf course equipment for the majority of my career, but that’s just a cube or two down from the folks responsible for these :-) Nice find and nice writeup!
You make a very good point Jaime. Not just the seat, but that steering wheel sure looks original and in mint condition too. Also the handles and knobs. If this is original it’s very well preserved.
Also that dash looks very clean too. I think Jaime is right, it’s original.
These are very good tractors. The jury is out on a restoration, but I’m going to say yes, the frame rails are way to nice and clean. The tin work looks very straight, if it’s original, it was barely used. My FIL many years ago bought a used John Deere similar to this with a mower deck. It had a large Kohler single cylinder like this one. It’s a lot of horsepower for a single cylinder and these do bang and hammer a bit. Someone had worked on the cylinder head and butchered it, when I opened the hood for the first time and saw the Permatex gasket material smeared all over the place my heart sank. I said why didn’t you talk to me first? Sure enough, eventually there was a huge bang, sheared the flywheel key and the head was cracked. This is probably around 2012. Back then I had a hard time finding parts, but I finally did, and redid the top end of the motor. Much to my surprise it started right up and ran like a top. There’s a certain level of satisfaction in fixing something, saving money, and being successful at it. Whether its a small tractor or a car or truck. I totally forgot about that thing until seeing this. Sadly, due to his dementia, He’s forgotten about it too. This one would be nice to just preserve and not really use it. I’m not sure about parts availability for this one. It would be great to use, but if something went on it, I don’t know if the parts are available anymore. I know I ran into trouble over 14 years ago. Nice write Mr. SG!!! Keep them coming!!!
Thanks for the info, Jamie and Dave! If this had a mower deck for $750, it would be worth a drive to WI for sure at that price. Maybe it’s worth a drive even without a mower, plow, tiller, etc…
That’s a real jewel! See some of the bigger versions of this going for a premium price as the new ones become less owner friendly for maintenance, more proprietary (read:$$$$) tools required.
Opps.
Oops oops
FINALLY, I’m always glad to see a post like this, brings me(us) back to reality, whatever that is. I’ve said several times, Horicon was like a 2nd home to me. John Deere employed most of Dodge Country, and probably still does. All JD products are the basis by which all others were judged, they were that well designed. My old GFs dad had a tractor very similar to this, like Dave sez, big single Kohler, no juice( hydraulics) but just a mower deck. She said her dad bought it new in the 70s, and to her knowledge, never had any problems for like 30 years. It was always in the family and always cut the grass.
After an exhaustive research session, I believe that hole in the floor had an adjustment knob, possibly for mower deck height and no air cleaner,,,come on, man, quite possibly the worst place NOT to have one. Nice find, but by no means rare. While no production figures are given, some estimates say tens of thousands were made. Many, I’m sure are still under that pile of rubble in the barn. Nice find.
Howard I operated Toros, Jacobsens, and Deere mowers, the JDs did just as well as any.
Their runaround Gators were seriously used and abused and very reliable in my 6yr experience.
Hi Stan, personally, I had a Simplicity Landlord, also from the 70s, it was my “go to” machine for 20 years. It did everything, and even on the coldest days, it never failed. I think all these tractors are of similar quality, there were so many and engineered to work.
The seller lowered the asking price to $650!