Disclosure: This site may receive compensation when you click on some links and make purchases.

Genuine Cooper S: 1966 Austin Mini Project

This rusty 1966 Mini Cooper is a genuine “S” model, verified by the provided British Motor Heritage Trust certificate. It is a major project, but certainly not past the point of saving. And given the impressive sales prices of genuine S cars over the last few years, there is more than enough to work with here. The seller points out numerous areas that will need rust repair and that the original engine and transmission are long gone, but that some details still remain as clues to its S specifications. Find it here on eBay with bids to $4,000 and the reserve unmet.

The Mini still wears its British registration plates on the rear, which makes it seem likely that this car was brought to the U.S. years ago, either with a service member or individual who was working overseas for a while. The seller notes he recovered it from a Wisconsin dairy barn, so it clearly hasn’t spent much time as a part of an owner’s prized collection, despite its relative rarity. The faded blue paint is not original, as the car left the factory wearing Old English White/Black with Red/Gold trim. The Mini does retain its original front disc/rear drum brake setup.

Those little details are what help enthusiasts determine the authenticity of a claimed “S” car, though this one leaves fewer concerns thanks to the aforementioned authenticity certificate. The seller notes that some of the other classic identifiers, like the brake booster and oil cooler, are missing, but it does come with the 120 m.p.h. speedometer. I have read that many 1966 S models have dual gas tanks, but this is not verified in the listing. Another major piece that’s missing? The floors. A whole lot of patchwork will be needed here to make this Mini roadworthy, including the front floorpans.

The rear floorpans may need work as well, and the seller lists out numerous other areas in need of attention. Scuttle corners, rear boot hinge panel, rear valence, rear subframe, battery box, and perhaps even the door skins are all identified as areas needing work/replacement. That’s before you even get to sourcing at least a non-matching but genuine S engine and gearbox and sorting out the interior. A major project but certainly a worthy one, but I suspect you’ll still eclipse the going rate for a nice “S” car if you’re not able to weld yourself.

Comments

  1. Avatar photo Gaspumpchas

    Hmmm a real John Cooper S. Someone will snap it up. Sure would be great to see this back on the road again. These were sure enough quirky, with go kart tires, sure would haul; #$$. saw a mill recently that was warmed up a bit, dynoed at 155 hp, would propel this baby nicely. it was built for an original (REAL) Mini
    Good luck to the new owner. Lots of work but a labor of love for someone!
    Cheers
    GPC

    Like 3
  2. Avatar photo Del

    Nice.

    Make a great ash tray.

    Like 4
  3. Avatar photo Classic Steel

    Hmm
    4000 and 20 more will get old rusty going again 😧
    Except my jeans pocket for wallet was
    Dry rotted it fell through and is lost 😃

    Love it ..
    “Undoubtedly there is ample rust.The car is crusty. The car needs to be completely gone through and restored.The front floors need replacing and maybe the rear as well. A pair of frontfloors come with the car. The previous owner had designs on replacement butnever got around to it. The wings could be replaced but the hinge panels seemok. The scuttle corners need replacing.The rear boot hinge panel need replacing. The rear valence is rusted as is therear subframe. The car could do with new door skins. The front subframe appearsfine. The battery box is rusted but the boot floor is fine. The driver sidesill should be replaced. “

    Like 2
  4. Avatar photo Steve

    British plates but LHD? I know its possible but how likely?

    Like 5
    • Avatar photo Classic Steel

      Paris Italy for example is Left etc.

      My dad stationed in Alconbury England in 70s had a morris minor rear barn door type wagon left hand drive and a 67 Jag for my mom Right hand etc.

      Like 3
  5. Avatar photo Mike

    The weird camera angles in the auction pics are giving me vertigo.

    Like 0
  6. Avatar photo KEVIN L HARPER

    A new body shell can be had for about 12k. I know that is a lot of money but probably cheaper than trying to restore this shell

    Like 4
  7. Avatar photo Tim

    Unfortunately, the finished car will not be this car. It needs so much replaced, that the restored car will probably only have the original VIN tag, maybe the engine block, and a handful of rare parts. However, the allure of the Cooper S will ensure that something lives again.

    Like 1
  8. Avatar photo FordGuy1972 Member

    There was a car dealer named Alec Poole in Dublin, Ireland that raced one of these back in the early ’70s. If I recall, his was turbo charged and reportedly had a top speed of 140mph. That must have been terrifying for a car with 10″ wheels. I did see it race at Phoenix Park a time or two and at Mondello Park where it did well in it’s class. I worked for a guy who raced an Austin A40 in the same class at the time and he told me that at high speed that little Mini didn’t look too stable on the straightaways. And it always passed him, sometimes it even lapped him.

    This Cooper S will definitely be a labor of love to restore and it won’t be cheap. These were great little cars that were a blast to drive, very popular at the time with an impressive racing reputation. I hope this one can be brought back to life again.

    Like 3
  9. Avatar photo Tin Box

    It’s also missing its hyrolastic suspension…tread carefully.
    The new bodyshells are nice, but not correct mk1.
    Re high speeds – a sorted mini is indeed very quick, it’s also shockingly stable at high speeds. A ton of fun.

    Like 3
  10. Avatar photo BG in AK

    If you look at the photo closely, you will see the top of the second gas cap. The suspension on this car would be the rubber donut and aluminium trumpet and should be easily sourced.
    My first car was a 66 mini and my brother had 4 over the years. Rallied them in local events in central Scotland, as did 2 of his friends.

    Like 1
    • Avatar photo Donek

      If it’s ’66 it should be Hydrolastic (’64-’71).

      Like 0
  11. Avatar photo Roger N Wall

    It’s not a Cooper S but if it’s a MK 1 Mini it might be worth a few Dollars.

    Like 0
    • Avatar photo Donek

      Why is it not a Cooper ‘S’?

      Like 0
  12. Avatar photo Danny

    Never seen a Cooper S without twin fuel tank fillers.

    Like 0
    • Avatar photo chichm

      Twin tanks were optional until ’66, so there were lots of single tank S’s.

      Like 0
    • Avatar photo Deano

      It does have two gas caps

      Like 0
  13. Avatar photo Pat Gill

    the heritage certificate shows it built as a LHD export model with US style lamps so was probably bought by a US service man and taken home at the end of his tour, look at bad obsession motorsport on youtube to see a shell rebuild, and a lot more!

    Like 0
  14. Avatar photo Mr Peter Leiss

    Built an S using a new 72 and a former race car. Had two former Brit Ley race mechanics put it all together. These when sorted properly were very stable at speed. Had mine up to 135 mph more than once. Tracked like a go cart on rails. Miss that little rocket.

    Like 0

Leave A Comment

RULES: No profanity, politics, or personal attacks.

Become a member to add images to your comments.

*

Get new comment updates via email. Or subscribe without commenting.