
As one of the most sought-after Chrysler offerings of its era, almost any 1970 Dodge Challenger is desirable because of its broad appeal. Other factors make some more special and valuable than others, such as high-performance engines or examples with so many options that it took 2 fender tags to list all the codes. This 1970 Dodge Challenger here on eBay is unusual for the opposite reason: it’s about the most basic, bare-bones E-Body you could get. If restored to stock specs, it will likely draw plenty of attention at shows and spark lots of interesting conversations. This one’s in Fairview, Tennessee, and the current bid of $5,800 still isn’t enough to lift the reserve-not-met status.

Readers old enough to remember when newspapers were the primary choice for dealerships to advertise vehicles may also recall certain cars were shown at a ridiculously low price, known as a “bait-and-switch” ploy. This lured an eager buyer to the lot, then a salesperson quickly tried to upsell them a fancier automobile when the price leader (aka “stripped-down” model) disappointed most customers. The seller thinks this Challenger was one of those cars, since it came with so few options, including no radio. However, that also means it has a Slant-6 engine and a 3-speed manual transmission, which is cool in its own right nowadays. Both are reportedly original and said to be in good working order.

The seller says he’s owned this Challenger for a few years and mentions it had some rust when he acquired it. Still, it’s described as far better than many projects out there, and several corrosion repairs have already been tackled. A few remain, along with additional bodywork, including a few areas under the primer that appear to show filler. The quarter panels may be the biggest culprits overall, but replacements are readily available, so this may be the best route.

A fender tag is still intact, but it isn’t shown, and I’m not sure what to make of those seats. No headliner is present, and the dash is cracked, so some additional interior work is still needed. Fortunately, the rails seem solid, so hopefully most of the remaining repairs will be above the frame. I sense that some potential buyers probably can’t wait to swap the Slant-6 and 3-speed for more satisfying components, but I’d probably keep this one as-is and restore it as close to original as possible. What would you do with this very basic 1970 Dodge Challenger?





Can you imagine the outcome if Kowalski drove this car? I think the ending would have been a lot different. Aside from the stick, I like it. We almost expect seeing a car like this, to be some snarling beast, totally out of kilter for today, yet,,with this car, you can LOOK like you are going fast, and still have a shred of responsibility. Not so in 1970, however, as I read the base Challenger here was about $2700. The hemi added almost $870. With the lack of options, I suspect the hood was added later. A total of 9929 of these were sold. Out of the almost 56,000 Challengers sold in 1970, it’s a safe bet most went with a V8. Okay, the 6 may be a bit lean for us throttle junkies, but for the future, we may as well get used to it. It’s a really cool car to be seen in, we just don’t need big V8s anymore. Nice find.
Howard. With this powertrain, not only would the ending of the movie have been different….
It would’ve Ended a LOT sooner too!!!😆 🤣 😂.
It would have ended with a whimper, not with a bang. But at least this one doesn’t have a column shift, which would have been really…unusual.
Talk about bait and switch. Bait us with 2 stunning Challengers, then switch to this homely thing Lol. I hope the reserve isn’t too high because I don’t think it’ll bring what they want imo.
Ah yes, the old ‘loss leader’ trick. I’ll guaran-damn-tee that’s what this one was. Just like the ’70 Barracuda convertible featured on here awhile back. Although that one ended up selling for a pretty penny. I don’t think this one will, though. GLWTS.
Please leave the slant in it.
Obviously the most valuable Charger is the rarest one, which would also be the most under powered one!
Sorry DB it’s a Challenger not a Charger
Oops
I think a 3 on the tree would be the icing on this cake. Not sure but that looks like a J.C.
Whitney shifter anyway
We had a slant Duster in our neighborhood owned by a Mopar Mechanic that was very impressive.
I say make it a sleeper with an Offenhauser dual intake with paired Holley 390’s, cast Dutra Duals exhaust manifolds, D.U.I. Tri-Power distributor, mill the head .100, COMP Cams High Energy Hydraulic Flat Tappet Cam kit and Wiseco forged pistons.
A slant 6 Duster is a blast to drive in winter on ice or snow covered roads!
They are light and nimble- perfectly balanced for drifting and sliding!
But I made the mistake of pushing one, my brother’s, on some fun joy riding one winter night in upstate, NY.
Next morning I found his duster was leaning over on one side up front…
Overnight one of the front suspension torsion bars snapped!
The break was a pretty cool looking helical fracture!
Dulcich claims he can make the slant six make BIG horsepower. Todd seems to know a few of those secrets. 300 would be a great number, and like the 6cyl Firebirds, this would be a major conversation piece at any cars and coffee-local car show. Anybody can buy a Hemi-Challenger, you’d have to build a 6cyl hot rod. Kinky!
The hood is definitely a boneyard upgrade.
Sweet Ride! Leave it like it is and enjoy it!
Over haul the engine slap a turbo onto that slant 6 & it’ll haul-ass source a rebuilt junkyard 727 autotrans cuz that 3spd will grenade under turbo pressure the slant 6 will be fine over engineered.
I almost agree, except I’d suggest an A833 4 speed or it’s 3+od sister to keep it a stick and not grenade the little 3 speed.
Imagine if instead of a floor shift it had “3 on the tree”?!
Lol
sure, is a long winded ebay listing. needs a lot of work, time and money. i want the guy who did that exhaust work to do a system for me. what an outstanding job he did. ha!
The car was Go Mango with a Burnt Orange interior. Very rare in any drivetrain configuration, even more so with this one. I think some of you are selling this car a little short on what it is. Rare car and sought after in any case. Would be absolutely beautiful restored, but obviously would take a lot of money to get there. Would be a labor of love.
A friend of mine bought one like this new. After a while he switched out the stock exhaust and intake manifolds to a split exhaust and two two barrel carbs. It ran pretty good and was surprisingly fast. Kept up with another friend who had a 318 Challenger.
Bondo baby over rust ., covered with primer. Uck……
This is a total waste of time. You cannot restore for anywhere close to what it is worth as a slant 6. Only buyer will be someone who puts in a 440 6 pack.
I had a 71 barracuda 318 column shift auto, so I love the body style and I also had a ’74 4 door slant 6 valiant auto that I drove for many many years, so those slant 6 are a ok with me
I love this car, and floor shift too!
I have to say, this is one of the most informative car project level EBay car ad I have ever read. It answers almost every question you might have without having to reach out to the seller and ask him/her.
So, good luck to the seller on the auction.
I like it because it is a three speed manual on the floor. It would be fun driver just driving around town with the six cylinder. It is not for the high powered market for these cars. I would just clean it up, put a decent acrylic enamel paint job on it (myself), clean up the interior and take it to coffee meets and Mopar gatherings just to see the interest it gathers. Eventually someone else would want it and you could make a few bucks and not lose anything like many of these projects wind up becoming.